620 2.0 Manual 01/96-10/99

Brake Discs and Pads for 620 2.0 Manual 01|96-10|99

Front Brake Discs

Part Number: MTEC511
Position: Front Brake Discs
Description: 1 pair of discs
Vented - Diameter: 282.0 Thickness: 23.0 Minimum Thickness: 21.0 Height: 34.0 Bore Diameter: 92.0 Studs: 4 Location Studs: 0

Black Edition Protective Coating (2 Discs)

Rear Brake Discs

Part Number: MTEC513
Position: Rear Brake Discs
Description: 1 pair of discs
Solid - Diameter: 260.0 Thickness: 10.0 Minimum Thickness: 8.0 Height: 48.0 Bore Diameter: 64.0 Studs: 4 Location Studs: 4

Black Edition Protective Coating (2 Discs)

Front Brake Pads

*** Popular ***

Part Number: MTECPAD4460 MTEC Brake Pads
Position: Front Brake Pads
Description: MTECPAD4460 MTEC Brake Pads

Part Number: BW532 Brakeworld Pads
Position: Front Brake Pads
Description:

BW532 Brakeworld Pads

£17.15

Part Number: BW464 Brakeworld Pads
Position: Front Brake Pads
Description:

BW464 Brakeworld Pads

Part Number: MDB1543 Mintex Brake Pads
Position: Front Brake Pads
Description: MDB1543 Mintex Brake Pads

£31.97

Part Number: MDB1635 Mintex Brake Pads
Position: Front Brake Pads
Description: MDB1635 Mintex Brake Pads

£31.35

Rear Brake Pads

*** Popular ***

Part Number: MTECPAD4416 MTEC Brake Pads
Position: Rear Brake Pads
Description: MTECPAD4416 MTEC Brake Pads

Part Number: BW462 Brakeworld Pads
Position: Rear Brake Pads
Description:

BW462 Brakeworld Pads

Part Number: MDB1564 Mintex Brake Pads
Position: Rear Brake Pads
Description: MDB1564 Mintex Brake Pads

£16.45

Brake Kits

Part Number: Rover 600 Series 1993-on Zinc Plated MTEC Performance Brake Hoses - ROV4P-3995
Position: Brake Kits
Description: MTEC stainless steel brake hose kits are available to suit all models of car. Kits feature the finest quality hose consisting of a PTFE inner with a stainless steel outer braid. This eliminates the spongy feel under arduous conditions giving greater braking efficiency or clutch operation as well as providing superior resistance to abrasion and corrosion. These kits therefore not only provide the reliability and safety demanded but offer brilliant good looks that improve the appearance of any installation.

100% Pressure tested. Guaranteed to be leak free and give an improved braking performance.
100% TUV DOT ADR and ISO approved. MTEC brake lines can be used worldwide.
Manufactured in the UK. All fittings are designed and manufactured to fit every application first time so no bending of banjos is required or universal fittings that do not fit properly.